The Mag Upgrade for your HDP5000 Printer/Encoder

  

So its time to upgrade your HDP 5000 and add the magnetic encoder! Its actually simple to do and here are the steps:

  1. Disconnect the power
  2. Open the front cover
  3. Remove the front screw.
  4. Remove the small plastic cover in the upper left hand corner.
  5. Insert the Mag module.
  6. Re-Install the small cover and screw and close the cover.
  7. Replace the power and refresh the system!

We also created a How-To video for the HDP5000 Mag Upgrade.

The Printer Wiz
/


Comments Add New

no comments found

paypal
The ResellerRatings Elite Program
ID Security Online BBB Business Review
Accept credit cards