Description
The module uses a roll of patch material that is applied to the surface of the card after it has been printed. The patch material is a thin film that can be either clear or holographic, and is available in a range of thicknesses and finishes. The patch material adds a layer of protection to the card that can help prevent counterfeiting, tampering, and fading due to exposure to UV light.
The Fargo HDP6600 One Patch Material Lamination Module can be configured to apply the patch material to both sides of the card.
Overall, the Fargo HDP6600 One Patch Material Lamination Module is a powerful tool for enhancing the security and durability of ID cards. By adding an additional layer of protection, it can help ensure that ID cards are long-lasting, tamper-resistant, and resistant to counterfeiting.
Specifications
Dual-side compatible with a dual-side printer only.
Lamination Method: Single-sided patch laminate
Lamination Speed: 45 seconds per card (including transfer to and from the module)
Lamination Types:
Clear patch laminate (0.6 mil thickness)
Custom holographic and overlaminates available upon request
Lamination Features:
Full coverage or spot lamination
SmartScreen™ graphical user interface for easy setup and operation
Lamination Material Capacity: Up to 250 cards (30 mil) per roll
Supported Card Types: PVC, ABS, PET, PETG, and polycarbonate cards with polished PVC finish
Operating System Support:
Windows 7, 8, and 10 (32- and 64-bit)
Windows Server 2008, 2012, and 2016 (32- and 64-bit)
Interface: USB 2.0 and Ethernet (10/100 Mbps)
Dimensions: 10.6" W x 9.2" H x 16.5" D (269mm x 234mm x 420mm)
Weight: 22.5 lbs (10.2 kg)
Power: 100-240V AC, 50-60Hz
Write a review