The lamination capabilities really is the icing on the cake, but don’t let that distract from the elite print quality you get with the HDP5000. This printer produces some of the finest imagery available for ID card printing. This fine-tuned process takes a reverse image and prints it on the underside of HDP Film before fusing the film to the surface. The result is a vibrant image that pops. In addition the HDP5000 can print right up the edge of smart chips as well as over the edge of the card for a complete image.
The last thing you need is for your printer to go down right before a major event or a large employee orientation. That’s why the HDP5000 was engineered to ensure minimal downtime and maximum durability. Because the printhead never comes into contact with the card surface, the risk of collecting debris or inflicting damage on itself is minimized. That’s why it brings a lifetime warranty to the table with confidence.
The HDP5000 has been updated which results in increased cards speeds that can print up to 150 cards per hour (YMC with transfer.)
In order to improve the durability and security of your ID cards, the lamination capabilities of the HDP5000 allow you to apply an overlaminate or holographic HDP film to the front side of the card. This improves the longevity of the card while also making counterfeiting and tampering more difficult. In addition, the Fargo HDP5000 is FIPS-201 certified.
With the understanding that the security of your employees and intellectual property matters, the HDP5000 offers a tamper-evident layer of HDP film between the card image and the world around it. That means if someone tries to peel apart the layers for the purpose of counterfeiting, the image basically destroys itself. Meanwhile, it also protects the image from daily wear and tear.
As mentioned before, the affordability of the HDP5000 is perhaps the crown jewel of this design considering the quality of the final product produced. As one of the most affordably priced reverse transfer printers available, the economics make this printer an easy win for organizations with tighter budgets. Meanwhile, you’ll get sharp images and fast printing with an easy-to-use comprehensive ID card printing solution.
Any who purchase the Fargo HDP5000 will not only get an industry-leading 3-year warranty, but you’ll get one year of free printer loaner support giving you the peace of mind that you’ll never be down a printer when you need it most.
Print Method: HDP Dye-Sublimation / Resin Thermal Transfer
Resolution: 300 dpi (11.8 dots/mm)
Colors: Up to 16.7 million / 256 shades per pixel
Print Speed (batch mode):**
Accepted Standard Card Sizes: CR-80 (3.370˝ L x 2.125˝ W / 85.6 mm L x 54 mm W)
Accepted Card Thickness: .030˝ (30 mil) to .050˝ (50 mil) / .762 mm to 1.27 mm
Input Card Cartridge Capacity: 100 cards (.030˝ / .762 mm)
Output Hopper Card Capacity: 200 cards (.030˝ / .762 mm)
Print Area: Over-the-edge on CR-80 cards
Included Software: FARGO Workbench Diagnostic Utility with Color Assist spot-color matching
All our extended warranty plans include:
Call 800-897-7024 Monday thru Friday from 8:30 am to 5pm or chat with us.
All parts and labor are included. Printheads are not covered after the first year.
We will send you a loaner while we service your printer so you can keep printing your badges.
2009-2020 © IDSecurityonline.com. All rights reserved.