HDP5600 600 DPI Dual Sided ID Card Printer

Print Method: HDP® Dye-Sublimation / Resin Thermal Transfer

Resolution: Available in 600 dpi (23.6 dots/mm) or 300 dpi (11.8 dots/mm)
Colors: Up to 16.7 million / 256 shades per pixel

Print Ribbon Options:

• Full-color, YMC*, 750 prints
• Full-color with resin black, YMCK*, 500 prints
• Full-color with two resin black panels, YMCKK*, 500 prints
• Full-color with resin black and heat seal panel for difficult-to-print surfaces,
• YMCKH*, 500 prints
• Full-color with resin black and inhibit panel for signature or other non-printing areas, YMCKI*, 500 prints
• Full-color with fluorescing and resin black, YMCFK*, 500 prints
• Full-color with two resin black and inhibit panels for signature or other non-printing areas, YMCKIKI*, 400 prints
• Full-color in half panel format with a full resin black panel,
• Half Panel YMCK*, 1000 prints
• Full-color in half panel with two full resin black panels for
• producing cards with full-color front and black-only back,
• Half Panel YMCKK*, 750 prints
• Premium Resin Black, K*, 3000 prints

HDP Film Options: Clear (Approximately 1500 prints) / Standard Holographic (500 prints) / Custom Holographic, special order (500 prints) / High Durable HDP Film (Clear) with increased durability for producing longer life cards (Approximately 1000 prints)

Overlaminate Options: Thermal Transfer Overlaminate, .25 mil thick, 500 prints / PolyGuard™ Overlaminate, 1.0 mil and .6 mil thick, 250 prints (PolyGuard available in a CR-80 patch size). All overlaminates available in clear, standard holographic design or custom holographic design

Print Speed Batch Mode:

• Up to 24 seconds per card / 150 cards per hour (YMC with transfer)*
• Up to 29 seconds per card / 124 cards per hour (YMCK with transfer)*
• Up to 40 seconds per card / 90 cards per hour (YMCKK with transfer)*
• Up to 35 seconds per card / 102 cards per hour (YMCK with transfer and dual-sided, simultaneous lamination)*
• Up to 48 seconds per card / 75 cards per hour (YMCKK with transfer and dual-sided, simultaneous lamination)*

Accepted Standard Card Sizes: CR-80 (3.375”L x 2.125”W / 85.6mmL x 54mmW)

Print Area: Over-the-edge on CR-80 cards

Accepted Card Thickness: 030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm

Accepted Card Types: ABS, PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards, polycarbonate. Note: ABS and PVC cards are not recommended for use in the HDP5600 Lamination Module

Input Card Cartridge Capacity: 100 cards (.030” / .762mm)

Output Hopper Card Capacity: 200 cards (.030” / .762mm)

Card Cleaning: Replaceable cleaning roller (included with each print ribbon)

Memory: 64 MB RAM

Display: User-friendly, SmartScreen™ LCD Control Panel

Software Drivers: Windows 10 / 8 / 7 / Vista / XP / Server 2012 / Server 2012 R2 / Server 2008 / Server 2008 R2 / Server 2003 R2 / Server 2003 R1
Mac OS X v10.10 / v10.9 / v10.8 / v10.7 / v10.6 and Linux

Encoding Options:
Supported smart card and magnetic stripe technologies: 125kHz (HID Prox) reader; 13.56 MHz (iCLASS® Standard/SE/SR/Seos, MIFARE Classic®,
MIFARE Plus®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder; contact smart card encoder reads from and writes to all
ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards; ISO magnetic stripe encoding, dual high- and
low-coercivity, tracks 1, 2 and 3.

Supported Access Control

Credential Programming iCLASS® Standard/SE/SR/Seos, MIFARE Classic®, MIFARE DESFire® EV1, HID Prox

Interface: USB 2.0 and Ethernet with internal print server

Operating Temperature: 65° to 90° F / 18° to 32° C

Humidity: 20 - 80% non-condensing

Dimensions:

• HDP5600: 11.50”H x 12.25”W x 9.25”D / 292mmH x 313mmW x 235mmD
• HDP5600 + Dual-Sided Module: 11.50”H x 17.50”W x 9.25”D / 292mmH x 445mmW x 235mmD
• HDP5600 + Single-Sided Lam Module: 12.75”H x 25”W x 9.25”D / 324mmH x 635mmW x 235mmD
• HDP5600 + Dual-Sided Module + Dual-Sided Lam Module: 12.75”H x 30”W x 9.25”D / 324mmH x 762mmW x 235mmD
• Lam Module: 12.75”H x 12.25”W x 9.25”D / 324mmH x 313mmW x 235mmD

Weight:

• HDP5600: 16 lbs. / 7.3 kg, HDP5000 + Dual-Sided Module: 22 lbs. / 10 kg
• HDP5600 + Single-Sided Lam Module: 28 lbs. / 12.7 kg
• HDP5600 + Dual-Sided Module + Dual-Sided Lam Module: 36 lbs. / 16.4 kg

Certifications: UL, CE, FCC

Supply Voltage: 100-240 VAC, 3.3A max

Supply Frequency: 50 Hz / 60 Hz

Warranty: 

• Printer – Three years including one year of free printer loaner support (U.S. only); optional Extended Warranty Program (U.S. only)
• Printhead – Lifetime; unlimited pass

FARGO Secure Materials:
FARGO Card Printer/Encoders require highly specialized media to function properly. To maximize printed card quality and durability, printhead life
and printer/encoder reliability, use only HID Secure Materials.
HID warranties are void, where not prohibited by law, when non-HID Secure Materials are used.

Options:

• 600 dpi 
• Dual card input hopper module
• Card lamination module – single-sided or dual-sided (simultaneous)
•  Magnetic stripe encoding
• 200-card input hopper
• Smart card encoding (contact/contactless)
• Dual-sided printing
• Physical locks for card hoppers and consumables access
• Printer cleaning kit
• Secure proprietary consumables system
• Custom secure holographic HDP Film and overlaminate
• Wi-Fi® Module

Software: FARGO Workbench diagnostic utility with Color Assist spot-color matching