Fargo HDP5000 Dual Sided ID Card Printer with Single Sided Lamination Specifications
Print Method: HDP Dye-Sublimation / Resin Thermal Transfer
Resolution: 300 dpi (11.8 dots/mm)
Colors: Up to 16.7 million / 256 shades per pixel
Print Ribbon Options:
- Full-color, YMC, 750 prints
- Full-color with resin black, YMCK, 500 prints
- Full-color with two resin black panels, YMCKK, 500 prints
- Full-color with resin black and heat seal panel for difficult-to-print surfaces, YMCKH, 500 prints
- Full-color with resin black and inhibit panel for signature or other non-printing areas, YMCKI, 500 prints
- Full-color with fluorescing and resin black, YMCFK, 500 prints
- Resin black, K, 3000 prints
HDP Film Options:
- Clear (1,500 prints)
- Standard Holographic (500 prints)
- Custom Holographic, special order (500 prints)
Overlaminate Options:
- Thermal Transfer Overlaminate, .25 mil thick, 500 prints
- PolyGuard over laminate, 1.0 mil and .6 mil thick, 250 prints (PolyGuard available in a CR-80 patch size)
- All overlaminates available in clear, standard holographic design or custom holographic design
Print Speed:
- 26 seconds per card / 138 cards per hour (YMC with transfer)
- 32 seconds per card / 113 cards per hour (YMCK with transfer)
- 47 seconds per card / 77 cards per hour (YMCKK with transfer)
Accepted Card Size:
CR-80: (3.370. L x 2.125. W / 85.6mmL x 54mmW)
Print area: Over-the-edge on CR-80 cards
Accepted Card Thickness:
Print only: .030. (30 mil) to .050. (50 mil) / .762mm to 1.27mm
Input Card Cartridge Capacity: 100 cards (.030. / .762mm)
Output Hopper Card Capacity: 200 cards (.030. / .762mm)
Card Cleaning: Replaceable cleaning roller (included with each print ribbon).
Memory: 16MB RAM
Display: User friendly, SmartScreenTM LCD Control Panel
Software Drivers: Windows® 2000 / XP / Server 2003 / Vista (32 bit), Mac OS X v10.4 / v10.5, and Linux
Interface:
USB 2.0 (high speed) and Ethernet with internal print server
System Requirements: x86 based PC or compatible, Windows 2000, Windows XP, Windows 2003, or Windows Vista, 500MHz computer with 256MB of RAM or higher, 500MB free hard disk space or higher
Operating Temperature: 65° to 90° F / 18° to 32° C
Supply Voltage: 100-240 VAC, 3.3 A
Humidity: 20 - 80% non-condensing
Dimensions: 12.75. H x 30. W x 9.25. D / 324mm H x 762mm W x 235mm D
Weight: 36 lbs. / 16.4 kg
Agency Listing:
- Safety: UL 60950, CSA C2.2 No 60950, CB report (EN 60950), and CE mark
- EMC: FCC Part15 Class A, EN 55022: 1998 Class A, CRC c1374, EN 61000-3-2: 2000,EN 61000-3-2: 1995, EN 55024: 1998, CE mark, and CCC mark
Supply Frequency: 50 Hz / 60 Hz
Software: Fargo Workbench Diagnostic Utility
Warranty:
Printer - Two years including one year of free printer loaner support
Printhead - Lifetime with unlimited pass